Autel DS708 reset Toyota Camry 07-10 TPMS

The tire pressure warning light blinks for 1 minute and stays on to indicate a tire pressure monitoring system malfunction after driving for about 20 minutes. If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work properly. Following part are the detail instructions on resetting Toyota Camry (2007-2010) TPMS (Tire Pressure Monitoring System) indicator light with Autel MaxiDAS DS708 diagnostic scanner.

Instruction:

Autel DS708 OBD2 diagnostic scan tool

Toyota Camry transmitter ID code

Ps: Where is the tire transmitter ID code located?

You need to copy the id code from the tire pressure sensor. It is stamped on the side of the sensor.)

Well install Autel DS708 software

Connect the DS708 scan tool with vehicle via OBD socket

Power on the device and browse to “System Menu”

Tips on throttle body relearn with autel maxidas ds708 diagnostic scan tool

MaxiDAS DS708 Autel wireless diagnostic scan tool makes throttle body relearning very easy without cutting wire. Here is the step-by-step instruction on the how reset GM ilde learn with ds708.

Instructions:

Well install MaxiDAS ds708 diagnostic software.

Connect DS708 main unit with vehicle via USB or wireless connection.

Select vehicle model GMC YuKon (high idle speed issue) and year.

Select “Diagnostic Trouble Codes DTCs” on “Engine Control Module” menu to clear fault code.

Check there is no stored fault codes, back to select “Special Functions” on main menu.

Select Engine Speed/Throttle >> Engine Position.

How to do Nissan Xterra Active Test with Autel DS708

Original Autel MaxiDAS DS708 diagnostic scan tool has a specific “Active Test” function menu where lots of functions are projected, like turn solenoids and injectors on and off, turn the fuel pump off etc.

Here is the instruction on doing an Nissan Xterra Active Test with Autel OBDⅡdiagnostic scanner.

Vehicle model: Nissan Xterra 2001

Well install DS708 diagnostic software

Connect the Autel DS708 main unit with vehicle via OBD socket

DS708 will do an “Auto Scan” which means it will automatically detect all engine control modules on the vehicle for diagnostic codes.